Applied Product Catalog 2017 2018 Page 561 Power Transmission

561 Power Transmission All Things Industrial Idler Shaft Features: Hardened and ground for maximum idler life Shouldered and threaded into units and locked with a setscrew to ensure maximum rigidity Interchangeable with all models Thread Type: UNC Dia. (in) Thread Size (in) Threads per Inch Shaft Length (in) Item No. Mfr. No. Net Price 1/2 3/8 16 1.50 110511505 GS-SO1 $11.54 1 3/4 10 2.13 110511500 GS-NO2 14.63 3.13 110511501 GS-NO3 15.80 4.13 110511502 GS-NO4 18.12 16 2.13 110511506 GS-SO2 14.63 3.13 110511507 GS-SO3 15.80 4.13 110511508 GS-SO4 18.12 1 1/2 1 8 4.00 110511503 GS-NO5 45.39 6.00 110511504 GS-NO6 51.04 14 4.00 110511509 GS-SO5 45.39 6.00 110511510 GS-SO6 51.04 360 Adjusting Drive Tightener Features: Removes slack Applications: V-belt Gear belt Roller chain drive Shaft Dia. (in) Shaft Type Stud Hole Shaft Length (in) Arm Height (in) Housing Length (in) Bolt Hole Spacing Width (in) Item No. Mfr. No. Net Price N/A None 1/2-13 N/A 2 4 1/2 3 1/2 100933313 ATH a $105.40 1/2 N1 3/8-16 1 1/2 1 2 5/8 2 100933314 ATN1 b 130.14 1 N2 N3 N4 None 3/4-10 2 1/8 3 1/8 4 1/8 2 4 1/2 3 1/2 100796696 ATQ c 119.18 1 1/2 N5 N6 None 1-8 4 6 5 6 3/4 5 1/4 100796697 ATQ-1 c 287.27 a No shaft required when used with idler bushings. b Shaft included. c Shaft must be ordered separately. Fixed Angle Drive Tightener V-belt and chain drives wear at an increased rate if allowed to run with insufficient tension. Adjustment of center distance is the best method of maintaining proper tension. In cases of fixed centers, tensioners and idlers provide the necessary means of take-up. Features: Removes slack Applications: V-belt Gear belt Roller chain drive Shaft Dia. (in) Shaft Type Stud Hole Shaft Length (in) Arm Height (in) Housing Length (in) Bolt Hole Spacing Width (in) Item No. Mfr. No. Net Price 1 N2 N3 N4 None 3/4-10 2 1/8 3 1/8 4 1/8 3 4.0 3 100933320 FATQ $77.24 Shaft must be ordered separately. Caution Too much tension in a drive causes excessive belt, chain, and bearing wear Too little tension in a drive allows belt slippage or chain vibration, resulting in loss of power and additional wear Double Adjusting Drive Tightener Features: Removes slack Applications: V-belt Gear belt Roller chain drive Shaft Dia. (in) Shaft Type Stud Hole (in) Shaft Length (in) Arm Height (in) Housing Length (in) Bolt Hole Spacing Width (in) Item No. Mfr. No. Net Price N/A None 11/16 N/A 2 4 5/8 3 1/2 100933317 DATSP a $99.77 9/16 N/A 2 4 5/8 3 1/2 100933316 DATSH a 99.77 1 N1 3/8-16 1 1/2 1 2 23/32 2 100933315 DATN1 b 143.07 N2 N3 N4 None 25/32 2 1/8 3 1/8 4 1/8 2 4 5/8 3 1/2 100796698 DATSQ c 99.77 a No shaft required when used with idler bushings. b Shaft included. c Shaft must be ordered separately.

Previous Page
Next Page